L-shaped laminate bar top on black steel pedestals in the DNS production hall, Vaughan

Plant and Capabilities: DNS Industries, Vaughan

DNS Industries manufactures commercial millwork and store fixtures in an approximately 40,000 sq ft facility at 967 Edgeley Blvd, Vaughan, Ontario. Below: what we make in-house, what specialist partners supply, typical lead times, and the documents we provide for prequalification.

L-shaped laminate bar top on black steel pedestals in the DNS production hall, Vaughan

Plant at a glance

  • Location: 967 Edgeley Blvd, Vaughan, Ontario, north of Toronto near Highways 400 and 407.
  • Facility: approximately 40,000 sq ft of manufacturing space.
  • Team: about 45 people at the Vaughan facility, across drafting, project management, production and shipping.
  • In business since: 2001.

Work done in-house

  • Shop drawings prepared by our own drafting team using Mozaik and SolidWorks, with CNC programming in EnRoute.
  • CNC machining on MultiCam CNC routers. Our sister company in the same building, CNC Router Store, supplies CNC router bits, knife blades and tooling to shops across Canada and the US.
  • Edgebanding on a Felder edgebander.
  • Solid surface fabrication. See solid surface fabrication.
  • Acrylic fabrication for risers, guards, case components and lit panels.
  • Finishing in our own finishing area.
  • LED integration in shelving, display cases and wall systems. See illuminated display fixtures.
  • Assembly, inspection, packing and staging of fixture packages, including store-by-store kitting for rollout programs.

Work done by specialist partners

DNS sources and coordinates these parts, so the client deals with one fixture supplier:

  • Metal fabrication and powder coating
  • Glass
  • Stone countertops
  • Vinyl graphics

Installation is done by DNS crews, by installation partners or by the project’s general contractor, depending on location and labour requirements; union sites are installed through our union installation partners.

Partner parts such as quartz tops, glass and metal frames are coordinated in our shop drawings, so the millwork is built to receive them.

Walnut-laminate glass wall case standing in the high-bay DNS plant

Project range

Relevant production history

DNS has delivered fixtures to more than 1,000 retail locations across North America. On the institutional side, we manufactured the complete casework package for a 132-bed long-term-care residence with four resident wings, completed in February 2026: each room type went through shop-drawing review once and was built for all four wings.

Kitchenette with walnut-look laminate cabinets and white solid-surface counter by DNS Industries at Mohawks Elder Care
A resident kitchenette from the four-wing long-term-care package, completed in February 2026.

How we run a large package

  • A designated project manager coordinates drawing approvals, production, delivery and site requirements.
  • Shop drawings are drafted in Mozaik and SolidWorks, and approved drawings program our CNC routers directly in EnRoute.
  • First-unit approval. On repeat work, a first unit or mock-up is built for approval before production.
  • Installation by DNS crews, installation partners or the general contractor, with union installation labour supplied through our partners where a project needs it.
  • Engineering. Where a project calls for engineer-stamped drawings, we coordinate that review through an outside engineer.
Cabinet runs assembled and dry-fit on the shop floor at DNS Industries, Vaughan, Ontario
Cabinet runs assembled and dry-fit on our shop floor before they ship.

Lead times

Lead times are project dependent. The schedule depends on package size, drawing approvals, materials and finishes, and we give it with each quote, planned back from your opening date. See store fixture and millwork lead times.

Quality standards

We work to the woodwork standard and grade the project specification names: the North American Architectural Woodwork Standards (NAAWS, published by AWMAC and the Woodwork Institute) or the ANSI/AWI standards, such as ANSI/AWI 0641 for casework. See AWI quality grades explained.

Finished store fixtures wrapped, strapped and labelled on crates for delivery from DNS

Delivery

Fixtures are crated, skidded or blanket-wrapped and shipped by commercial carriers from Vaughan to sites across Ontario, the rest of Canada and the United States. Large packages can be staged in the plant and released to site in phases.

Documents for prequalification

For a GC or owner’s prequalification we can provide, on request:

  • Capabilities statement and project references
  • Certificate of insurance

See qualifications and procurement.

Frequently asked questions

How large a millwork package can DNS take on?

Capacity depends on scope and schedule more than dollar value. Send the package, the site dates and any phasing, and DNS will confirm whether it can hold the schedule before quoting.

Does DNS subcontract any of its work?

Yes, for metal, powder coating, glass, stone and vinyl graphics. Installation is done by DNS crews, installation partners or the general contractor, depending on the site. Millwork, solid surface, acrylic, finishing, LED integration and assembly are done in our plant.

Can I visit the plant?

Yes. Buyers, designers and GCs can tour the facility by arrangement. Contact us through Get in Touch or call 905-761-9568.

How far ahead should I book production?

Plan for shop drawings plus production time from the lead times above, and contact us with your opening or occupancy date as early as you can so production can be scheduled.

Send us your drawings.

An architectural set, a bid package, a sketch, or a photo of the last one that did not work. We will tell you what it costs, what we would change, and when you can have it.

Send drawings